Itel S11 Plus Flash File MT6580 Hang Logo Dead Fix Firmware
Itel S11 Plus Flash File MT6580 Hang Logo Dead Fix Firmware ===== https://fancli.com/2tARet
How to Download and Install Itel S11 Plus Flash File MT6580 to Fix Hang Logo and Dead Issues
If you are looking for a solution to fix your Itel S11 Plus smartphone that is stuck at the android logo or has a dead problem, then you are in the right place. In this article, we will show you how to download and install the Itel S11 Plus flash file MT6580 that can help you to restore your phone to its original state. The flash file is also known as the stock ROM or firmware, and it contains the operating system and other software components of your phone. By flashing the stock ROM, you can solve various issues such as hang logo, dead boot, frp lock, lcd black or white, monkey virus, etc.
Before we proceed, let us give you some information about the Itel S11 Plus smartphone. It is a budget-friendly device that was released in 2019. It has a 5.5-inch IPS LCD display with a resolution of 480 x 854 pixels. It is powered by a MediaTek MT6580 chipset with a quad-core 1.3 GHz processor and 2 GB of RAM. It has 16 GB of internal storage that can be expanded up to 32 GB via a microSD card. It has an 8 MP rear camera and a 5 MP front camera. It runs on Android 6.0 Marshmallow and has a 2400 mAh battery.
How to Download Itel S11 Plus Flash File MT6580
To download the Itel S11 Plus flash file MT6580, you need to have a reliable internet connection and a computer. You can follow these steps:
Go to https://needflashrom.com/itel-s11-plus-flash-file/, which is a trusted website that provides free and tested flash files for various smartphone models.
Scroll down and find the download link for the Itel S11 Plus flash file MT6580. Click on it and wait for the Google Drive page to open.
Click on the download icon at the top right corner of the page and save the zip file on your computer.
Extract the zip file using any software like WinRAR or 7-Zip. You will get a folder containing the flash file, flash tool, driver, and manual instructions.
How to Install Itel S11 Plus Flash File MT6580
To install the Itel S11 Plus flash file MT6580, you need to have some requirements and follow some precautions. Here are they:
A computer running Windows XP, 7, 8, or 10.
A USB cable compatible with your phone.
A backup of your personal data, as flashing will erase everything on your phone.
A fully charged battery or at least 50% of battery life.
Do not disconnect or interrupt the flashing process, as it may cause damage to your phone.
Do not flash the wrong or incompatible flash file, as it may brick your phone.
Follow the manual instructions carefully and do not skip any step.
After fulfilling the requirements and taking the precautions, you can proceed with these steps:
Install the driver on your computer by running the Driver.exe file from the extracted folder.
Open the SP Flash Tool folder and run the flash_tool.exe file as administrator.
Click on the Scatter-loading button and browse to the extracted folder. Select the MT6580_Android_scatter.txt file and click Open.
Make sure all the boxes are checked in the SP Flash Tool window and click on Download.
Turn off your phone and remove the battery if possible. Connect your phone to the computer via USB cable while holding the Volume Down or Volume Up button.
The SP Flash Tool will detect your phone and start flashing. Wait for the process to complete. You will see a green tick mark when it is done.
Disconnect your phone from the computer and insert the battery if removed. Turn on your phone and enjoy 061ffe29dd